محصولات محصولات تک سیستم (Tecsystem) ایتالیا تجهیزات و سنسور های دما

مدل : AU12

In order to grant a proper power supply of its devices, maintaining a high degree of noise immunity, TECSYSTEM has developed the AU12 power supply with output 12Vdc. The box can be installed on DIN rail with other products ensuring the best convenience.

اطلاعات بیشتر

مدل :AU24

In order to grant a proper power supply of its devices, maintaining a high degree of noise immunity, TECSYSTEM has developed the AU12 power supply with output 12Vdc. The box can be installed on DIN rail with other products ensuring the best convenience. AU12 electrical features • Input: 85-260 Vac-dc, 50/60 Hz, 6VA • Output: 12Vdc ± 10%, 0,5 A (short circuit protection) Mechanical features • Dimensions: 71 x 90 x 58 mm DIN 43880 • Box in Noryl 94V0 self-extinguishing for mounting on DIN rail • Ambient operating temperature: da -20°C a +60°C • Humidity: 90% non-condensing

اطلاعات بیشتر

مدل : BUSMOD 8/A

Din-rail external module for the RS485 Modbus digital output. The connection between the module and the unit is made through the serial bus Tecsybus in Tx/Rx (four-wires optically isolated), which grants a high level of protection against electromagnetic interferences. The RS485 Modbus protocol ensures the possibility to be interfaced to a wide range of monitoring systems.

اطلاعات بیشتر

مدل :CONV 232/485

Din-rail external module for the RS485 Modbus digital output. The connection between the module and the unit is made through the serial bus Tecsybus in Tx/Rx (four-wires optically isolated), which grants a high level of protection against electromagnetic interferences. The RS485 Modbus protocol ensures the possibility to be interfaced to a wide range of monitoring systems. • RS485 ModBus RTU • Digital output Tecsybus four-wires input (to connect the unit ) • Power supply: 24 Vac-dc • Burden: 2VA • Mounting on DIN 50022 rail • Dimensions: 71 x 90 x 58 mm • Box material: Noryl 94V0 • Color: RAL 7035 • Available versions: BUSMOD 8/A for NT935, NT538, NT133 units

اطلاعات بیشتر

مدل : CONV 4/420/A

DIN-rail external module for 4 analogue outputs 4-20 mA (Mod. CONV 4/420/A for NT935 unit). The connection between the two devices is made through the serial bus Tecsybus (two- wire optically isolated), which grants a high level of protection against electromagnetic interferences. The 4-20 mA outputs are referred to the 4 temperatures detected by the unit in a range between 0°C and 240°C

اطلاعات بیشتر

مدل : CONV 8/420/A

DIN-rail external module for 8 analogue outputs 4-20 mA (Mod. CONV 8/420/A for NT538 unit). The connection between the two devices is made through the serial bus Tecsybus (two- wire optically isolated), which grants a high level of protection against electromagnetic interferences. The 4-20 mA outputs are referred to the 8 temperatures detected by the unit in a range between 0°C and 240°C

اطلاعات بیشتر

مدل : CONV61850

The CONV 61850 is an optional external module designed for NT935 and NT538 units, which allows a remote monitoring through the use of an Ethernet network, thanks to the protocol IEC61850. It is a protocol designed for the automation of electric substation in order to make easier the configuration and communication between different devices. It is thus possible to integrate into the IEC61850 remote control system also the temperature monitoring. The module is easily configurable to the needs of the installer, as prepared for communication with our units NT935/538. From the side of IEC61850 the setting is made through the appropriate ICD file.

اطلاعات بیشتر

مدل: CTES Extension cable

Extension cable for Pt100 sensor • In accordance with 20.35 CEI rules • 4 terns 20AWG with shield • External diameter: 12 mm • Operating temp.: from -35°C to +90°C • Dielectric strength: 2000 Vac - 60”

اطلاعات بیشتر

مدل: CTSE Extension cable

Extension cable for Pt100 sensor External diameter: 5,2 mm ± 0,2 Operating temp.: from -40°C to +220°C Dielectric strength: 5000 Vac – 60”

اطلاعات بیشتر

مدلMOD RL4/A

DIN-rail external module equipped with 4 ALARM and TRIP relays. The connection between the module and the unit is made through the serial bus Tecsybus (two-wires optically isolated), which grants a high level of protection against electromagnetic interferences. The output relays are related to the single channel of the unit, in this way the user has at disposal one ALARM and TRIP relay for each input of the unit (NT935 or NT538).

اطلاعات بیشتر

مدل : MOD RL8/A

DIN-rail external module equipped with 4 ALARM and TRIP relays. The connection between the module and the unit is made through the serial bus Tecsybus (two-wires optically isolated), which grants a high level of protection against electromagnetic interferences. The output relays are related to the single channel of the unit, in this way the user has at disposal one ALARM and TRIP relay for each input of the unit (NT935 or NT538). Tecsybus two-wires input (to connect the unit) • 4 alarm and 4 trip relays + 1 FAULT (NT935) • 8 alarm and 8 trip relays + 1 FAULT (NT538) • Fault for working anomalies indication (no serial communication, power supply fault, sensors fault) • P ower supply: 24 Vac-dc • Burden: 4VA • Mounting on DIN EN50022 rail • Dimensions: 182 x 127 x 99 mm • Box material: - lateral elements by polyamides UL 94V0 - support section by PVC self-extinguishing • Available versions: MOD RL4/A for NT935

اطلاعات بیشتر

مدل : MULTIMODULE 133

DIN-rail external module, which combines several functions in one device.

اطلاعات بیشتر

مدل : PT 73-220

The PT73-220 is a device that can provide additional protection to our units. Its use is recommended on systems where there are large surges and fluctuations in 230 Vac power supply. Moreover, it is very effective in cutting the peak voltage that is generated when you closed the MV switch, thanks to a turn-on delay. The device can be easily installed inside the panel through the DIN EN50022 rail. A red led indicates the possible intervention of fuses.

اطلاعات بیشتر

مدل: Pt100 SIMULATOR

In case the operator needs to verify the right working of a device, he can use our Pt100 Simulator. With a simple operation the operator can replace the sensors connected to the unit with the terminal supplied with the SIMULATOR. By the potentiometer or the toggle switches he can easily simulate the temperature values. It is also possible to simulate different sensor faults such as, short circuit or open circuit.

اطلاعات بیشتر

مدل :Ptc SIMULATOR

In case the operator needs to verify the right working of a device, he can use our Pt100 Simulator. With a simple operation the operator can replace the sensors connected to the unit with the terminal supplied with the SIMULATOR. By the potentiometer or the toggle switches he can easily simulate the temperature values. It is also possible to simulate different sensor faults such as, short circuit or open circuit.

اطلاعات بیشتر

مدل:PTC Temperature sensor

Designed to control the temperature of the windings of transformers and motors • In accordance with DIN 44081 and 44082 rules • Response temperature: from 60°C to 190°C • Fast response type • Cable in PTFE (std 3 m) further lengths on request • Φ of the sensor: 3 mm • Lead cross-section: 0,14 mm²

اطلاعات بیشتر

مدل :PTFE Temperature sensor

• P TFE 30 KV • RTD Pt100 1 DIN sensor • Round ø 8 x 70 mm • Cable CuAg 3 x 0,38 mm² insulated • Dielectric strength: 30 kVac - 60” • Max. operating temp.: 220°C • IEC 751

اطلاعات بیشتر

مدل : PTO Temperature sensor

• RTD Pt100 1 DIN sensor • Head DIN B, SS probe Φ 8 mm • P robe length: from 100 to 200 mm • Thread ¾” or ½” gas • Dielectric strength: 3000 Vac - 60”

اطلاعات بیشتر

مدل :PTSE Temperature sensor

PTSE Temperature sensor Pt100 sensor Extension cable 3 wires with shield Standard cable length: 2,5 mt (different lenghts on request

اطلاعات بیشتر

مدل : PTSP Temperature sensor

RTD Pt100 1 DIN Flat type 2,5 x 10 x 60 mm in GRP Cable type CuSn 3 x 0,22 mm2 MFA insulated Dielectric strength: 3000 Vac – 60” Max. operating temp.: 180°C IEC 751

اطلاعات بیشتر

مدل : SCS-R 3/4 sensors wiring box

SCS-R is a box designed and manufactured by TECSYSTEM for a quick, safe and economic connection of the sensors which detect the temperature of cast resin transformers. The length of the sensors’ cables can be arranged according to the customer needs.

اطلاعات بیشتر

مدل : ST202 SERIES

The ST202 series displays allow to remotely view the temperatures monitored by the control unit. There are three versions available depending on the connected devices. ST202: designed to be connected to the external modules ST CONV 4/A and ST CONV 8/A. The device allows to remotely view the temperature values of the required channels. ST202B: designed to be connected to the NT133 unit. The device allows to remotely view the values of oil temperature, winding, and the presence of Alarm and Trip conditions. ST202C: designed to be connected to the NT935, NT538, ST154 and ST538 units. The device allows to remotely view the values of the monitored channels and the presence of Alarm and Trip conditions.

اطلاعات بیشتر

مدل : SCS-R 6/8 sensors wiring box

SCS-R is a box designed and manufactured by TECSYSTEM for a quick, safe and economic connection of the sensors which detect the temperature of cast resin transformers. The length of the sensors’ cables can be arranged according to the customer needs.

اطلاعات بیشتر